How To Change Bathroom Sink Taps
Introduction
Are you tired of your old, rusty bathroom sink taps and want to upgrade to a new, stylish set? Replacing your sink taps may seem like a daunting task, but with the right tools and some basic knowledge, it can be done easily and quickly. In this guide, we will walk you through the steps to change your bathroom sink taps.
Tools and Materials Needed
Before you start, make sure you have the following tools and materials:
- Adjustable wrench
- Basin wrench
- Screwdriver
- New sink taps
- Plumber’s putty
- Teflon tape
- Cloth or rag
Step 1: Turn Off the Water Supply
Before you start, turn off the water supply to your sink by closing the hot and cold water valves under the sink. If you cannot find the valves, turn off the main water supply to your house.
Step 2: Remove the Old Sink Taps
Use an adjustable wrench to loosen and remove the nuts that hold the old sink taps in place. If the nuts are too tight, use a basin wrench for better leverage. Once the nuts are removed, lift the old sink taps from the sink.
Step 3: Clean the Sink Surface
Use a cloth or rag to clean the surface of the sink where the old sink taps were installed. Remove any old plumber’s putty or debris from the surface.
Step 4: Install the New Sink Taps
Apply plumber’s putty to the base of the new sink taps and insert them into the holes on the sink. Make sure the taps are centered and level. Tighten the nuts underneath the sink to secure the new taps in place.
Step 5: Connect the Water Supply
Wrap Teflon tape around the threads of the water supply pipes and connect them to the new sink taps. Tighten the connections with an adjustable wrench.
Step 6: Test the New Sink Taps
Turn on the water supply and test the new sink taps. Check for any leaks and tighten any connections if necessary.
Conclusion
Changing bathroom sink taps may seem like a daunting task, but with the right tools and knowledge, it can be done easily and quickly. Remember to turn off the water supply before you start, remove the old sink taps, clean the sink surface, install the new sink taps, connect the water supply, and test the new taps for any leaks. With your new, stylish sink taps, your bathroom will look and feel brand new.